login
This is the image preview of the following page:
HV Nixie DC-DC Switching Power Supply
[Customadds id=643821] Nixie tubes need about ~180Vdc to light up and thus on most devices, a DC-DC converter is needed. Here we designed a simple DC-DC switching regulator capable of powering most of Nixie tubes. The board accepts 12Vdc input and gives an output of 150-250Vdc. The board is heavi... Read More
Image Downloads:
- full (2560x1653)
- thumbnail (150x150)
- medium (850x549)
- medium_large (640x413)
- large (640x413)
- 1536x1536 (1536x992)
- 2048x2048 (2048x1322)
- re_large (783x600)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x15)
- menu-36x36 (36x23)
- menu-48x48 (48x31)
- sendpress-max (600x387)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x387)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x97)
RELATED POSTS
12 September, 2023 Economical 12-bit Rigol DHO800/900 Oscilloscope Series
14 May, 2019 GW16126 Mini-PCIe Modem and Bluetooth Radio
28 April, 2020 Trinamic Introduces the TMCM-1617 Servo Controller Module
14 May, 2020 STLINK-V3MODS Embedded Debugger and Programmer
7 November, 2018 Solar Powered Beehive Monitor Using Sigfox network
27 August, 2019 Getting started with the new ATtiny chips
