login
This is the image preview of the following page:
[Customadds id=643821] Introduction I have been using the toner transfer method for about 9 years with great results. Occasionally I would need a board with finer traces and I would use UV method. My exposure setup allowed only a single sided board to be made and it was composed of a 30c... Read More
Image Downloads:
- full (1496x802)
- thumbnail (150x150)
- medium (850x456)
- medium_large (640x343)
- large (640x343)
- 1536x1536 (1496x802)
- 2048x2048 (1496x802)
- re_large (783x600)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x13)
- menu-36x36 (36x19)
- menu-48x48 (48x26)
- sendpress-max (600x322)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x322)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x80)
RELATED POSTS
1 April, 2016 Measure small LCs with a scope
27 December, 2015 ATtiny OLED Watch Core
5 November, 2018 Sensirion Particulate Matter Sensor
12 February, 2018 Researchers Developed a Very Powerful Mini Synchrotron That Can Fit On A Tabletop
31 August, 2022 LITIX Power TLD6098-2ES DC/DC Boost Controller
13 June, 2016 Running NodeMCU on a battery
