ESP32-Based FluidNC TMC2209 CNC Controller runs FluidNC open-source firmware
Robots

ESP32-Based FluidNC TMC2209 CNC Controller runs FluidNC open-source firmware

FluidNC TMC2209 Pen/Laser CNC Controller is an ESP32-based 2-axis CNC controller with FluidNC firmware. This CNC controller is designed for machines that use stepper motors on 2 axes. These include pen drawing machines, laser cutters/engravers, sand plotters, etc. It also has an RC...

Continue Reading
1.089
Views
0 Comments
xTool P2 Review – A Powerful 55W CO2 Laser Cutter and Engraver with Advanced Software Features
Laser

xTool P2 Review – A Powerful 55W CO2 Laser Cutter and Engraver with Advanced Software Features

Previously we have written about many laser engravers like the AlgoLaser Delta, ATEZR P20 PLUS, and many similar but all of those laser cutters and engraver has one thing in common, they were designed for a beginner or a hobbyist who just wanted to get started with engraving, and is not...

Continue Reading
1.162
Views
0 Comments
Atezr’s Second-Generation Engravers L2 Offers New Technical Upgrade
LaserTop Stories

Atezr’s Second-Generation Engravers L2 Offers New Technical Upgrade

Introduction Atezr, an innovative and trailblazing brand within the laser engraving industry, recently unveiled a new series of cutting-edge laser engravers called L2, representing the second generation of their product line. The L2 models are available in three variants: 10W, 20W, and...

Continue Reading
1.207
Views
0 Comments
Exploring The All New ATEZR P20 Plus 20W Laser Engraver 
LaserTop Stories

Exploring The All New ATEZR P20 Plus 20W Laser Engraver 

ATEZR P20 PLUS Laser Cutter Machine Atezr P20 Plus Laser Engraving Machine is a machine designed specifically for laser engraving. The name of the machine, however, is deceptive. And it's not just limited to that, either. You can use the P20 to engrave on a variety of substrates,...

Continue Reading
1.295
Views
0 Comments
Learn how! Robotic ultraArm P340 by Arduino sketches, engraves, and grabs
Robots

Learn how! Robotic ultraArm P340 by Arduino sketches, engraves, and grabs

The Elephant Robotics ultraArm P340 is a robot arm that has a working radius of 340 mm and is controlled by an Arduino-compatible ATMega2560 control board. The arm of this robot may be outfitted with a variety of accessories that can be used for painting, laser engraving, or grabbing...

Continue Reading
1.197
Views
0 Comments
LONGER RAY5 Laser Engraver: Is it meant for you?
Laser

LONGER RAY5 Laser Engraver: Is it meant for you?

Laser engraving technology has been widely used by designers, makers, and hobbyists to engrave solid marks on different types of materials that are exposed to the engraver machine. Laser engraving machines are designed for cutting, etching, marking, and engraving hard materials while...

Continue Reading
1.219
Views
0 Comments
ORTUR Laser Master 2 Pro: High Precision laser engraver for the ultimate engraving experience
Laser

ORTUR Laser Master 2 Pro: High Precision laser engraver for the ultimate engraving experience

Laser engraving is a common practice of using lasers to engrave anything on an object like designs, photos, any form of data, etc. This drawing tool is now an increasingly adopted tool for small businesses, product designers, makers, as well as hobbyists. A laser engraver machine...

Continue Reading
3.101
Views
0 Comments
Runmecy, A Compact Laser Engraver And Cutter
Laser

Runmecy, A Compact Laser Engraver And Cutter

A campaign has been launched on Kickstarter for a laser engraver called Runmecy. The Runmecy is a laser engraver and cutter that combines more power, speed, and safety than any other engraver in a compact and lightweight design. It enables you to be innovative on any project, whether...

Continue Reading
2.420
Views
1 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives