Home Blog  





7 Sep 2011

HOW TO – Building a simple Fritzing component… Bertrand writes – [via]

This is me shaving a yak. Shaving the yak, if you don’t know, is what you do when a seemingly simple task necessitates many recursive and unforeseen sub-tasks in order to be carried out.

The story goes like this… Let’s say that I want to paint a picture, but I’m in a shack in the middle of the desert and I don’t have a canvas, brushes or paint. I do have a piece of strong cloth, a few pieces of wood, and the rocks around the shack can provide some pigments that I can mix with some oil. For the nails, I can extract some from the shack’s structure itself. For the brush, I’ll need some quality hair. Well, long story short, before I know it, here I am, in the middle of the desert, shaving a yak.

Today’s metaphorical yak is the representation in Fritzing of a $0.95 part, a knob potentiometer. Fritzing is a wonderful Open Source tool for designing electronic circuits. Its only shortcoming is that its library of components is not yet complete enough that it can be used to design all circuits. In my case, it’s lacking the SD card reader that I’m using, analog sticks and… this small $0.95 potentiometer. Well, in fact, for the potentiometer, I could have easily used one of the stock components from Fritzing that is close enough, but for my first component design, I wanted to start with a fairly simple part so I went ahead with it anyways, with the hope of having a better fit in the end.

Building a simple Fritzing component - [Link]

Leave a Reply

You must be logged in to post a comment.



 
 
 

 

 

 

Search Site | Advertising | Contact Us
Elektrotekno.com | Free Schematics Search Engine | Electronic Kits