4-Channel Remote Receiver Using NRF24L01 Radio Module – Arduino Compatible

4-Channel Remote Receiver Using NRF24L01 Radio Module – Arduino Compatible

Controlling 4 devices using an RF remote is very easy with this project. This is an Arduino compatible project. NRF24L01 module, Atmega328 microcontroller, 3.3V regulator, and few other components are part of the project. Onboard power LED and an additional functional LED is provided....

Continue Reading
1.313
Views
0 Comments
IR Remote Controlled Motorized Potentiometer – Arduino Compatible

IR Remote Controlled Motorized Potentiometer – Arduino Compatible

This is an Infrared Remote controlled motorized potentiometer controller. It's an open-source project built on the Arduino platform and compatible with Arduino IDE for custom programming. The project consists ATMEGA328 microcontroller, IR sensor, L293D motor driver, ALPS Motorized...

Continue Reading
2.306
Views
9 Comments
Single Joystick Remote Control Transmitter using NRF24L01 – Arduino Compatible

Single Joystick Remote Control Transmitter using NRF24L01 – Arduino Compatible

This is an Arduino compatible open-source hardware that includes 1 x joystick, NRF24L01 RF module, Atmega328D microcontroller, 3.3V regulator, power LED, function LED, and other required components. This board can be used for the development of various applications such as Gaming,...

Continue Reading
1.908
Views
0 Comments
Arduino Nano- Switching ON/OFF Appliances Using Infra-Red Remote (Two Channel)

Arduino Nano- Switching ON/OFF Appliances Using Infra-Red Remote (Two Channel)

The project presented here is a two-channel infrared remote ON/OFF switch that can be used to control home appliances, Lights, Fans, Water Pumps, Aquarium pumps, Ovens, Heaters, etc. This open-source project contains 2 x SSR (Solid State Relay), Arduino Nano, and TSOP1838 infrared...

Continue Reading
3.320
Views
0 Comments
8 Channel Infra-Red Remote-Control Arduino Shield Using ULN2803

8 Channel Infra-Red Remote-Control Arduino Shield Using ULN2803

This is an 8 channel infra-red remote-control Arduino shield that can drive 8 high current loads such as LEDs, solenoids, multiple toy DC Motors, dual unipolar stepper motor, filament lamps, etc. Each channel consists of two parallel NPN transistors with freewheel diodes which are...

Continue Reading
3.287
Views
0 Comments
Archives