Search Results for : STM32Cube

The aim of this project is to send messages via Bluetooth using a web browser or smartphone to an LCD display that is connected to the STM32 board. 1. Introduction The project is based on STM32 Nucleo-144 which controls LCD display using BleuIO. For this project, we will need two...

Pettee Ultra-Wideband (UWB) employs the STM32F401RBT6 microcontroller unit, which facilitates speed and is capable of managing and running powerful applications. The Pettee UWB custom board’s design consists of sample sketches that illustrate functionality for all of the board’s...

A simple Bluetooth Low Energy project showing how to get sensor data from SHT85 which is connected to the STM32 Nucleo-144 using javascript. Requirements : A BleuIO dongle (https://www.bleuio.com/) An SHT85 sensor (https://sensirion.com/products/catalog/SHT85/) A board...

Home automation involves automating household environment equipment. To achieve that, we have created a smart bulb that is easy to install, and the attached equipment can be controlled over a web browser or smartphone app. The aim of this project is to control different home appliances...

1. Introduction The project is a simple example showcasing a quick way to set up a STM32Cube project as a USB CDC Host capable of communicating with the BleuIO Dongle. When a BleuIO Dongle is connected to the Nucleo boards USB port the STM32 will recognize it. It will then accept 3...

A handful of microcontrollers for IoT applications have hit the hardware ecosystem over the past years, allowing for easy development of embedded and standalone IoT-based systems. Most of these MCUs and processor chips, however, are expensive, power-consuming, and lack large memory and...

Electronics maker Orkhan Amiraslan has unveiled a new GPIO-Rich Lora-capable Penguino board based on Move Solutions' MAMWLE SoM. The compact Penguino STM32WL MAMWLE-C1 LoRa dev board differentiates itself in terms of power, size, and flexibility. It is equipped with STMicroelectronics'...

A rotary encoder is a position sensor that converts the motion of a knob into an output signal that is used to determine the direction the knob is being rotated. Rotary encoders are usually attached to motors and are used to ensure that the motor stator and rotor positions are always...