login
Control 16 Relays with your Pi, supplying 12V to 16 DC jacks. All powered from and ATX Power Supply, with sensor support on board. You can find more details on the author’s website. by @ kickstarter.com:
I started out with the simple goal of wanting to automate a few things around the home starting with my vertical garden using a Raspberry Pi.
With that goal in mind I decided to make a 16 bay relay board so I could control as many devices as possible from a single point. It was then I found how much space this would take up, and how long it would take to wire up and it became impractical.
So the next logical step was to look into making my own PCB. I noticed that virtually all the devices I wanted to control ran on 12V, I also noticed how many spare ATX power supplies I had lying around and the gears in my head started turning.
Raspberry Pi ATX Power Board – [Link]
RELATED POSTS
14 April, 2024 Noni Radio Module: Unlocking WiFi-7 Connectivity with Qualcomm’s Chipsets
8 September, 2020 High density robust SSD offers densities up to 1TB in a 16×20 mm BGA
2 February, 2020 Introduction to LoRa – Send data between two Arduino using LoRa
30 March, 2017 Ultra-low dropout, wide input range 150mA regulator
20 July, 2021 Vecow Launches EAC-2000 Series NVIDIA Jetson Xavier Fanless Embedded System
3 December, 2015 A DIY A4 Laser Engraver using ATmega328
